With winter looming just around the corner, it is time to start thinking about a Glassboro NJ’s Heating Contractor. At the very least, you need to have your central heating cleaned and serviced before you start the unit up this year. Considering how quickly it can get cold in New Jersey and the surrounding areas, you may want to contact your favourite repairman soon. The typical cleaning removes any lint and dust that has built up in the heating chamber over months of disuse. This is very important because this dirt is quite flammable and has been know to cause flash fires and ruin the furnace or worse, destroy the home.
The most common reason to contact a Glassboro NJ’s Heating Contractor is a failing furnace. Household furnaces come in two basic types, an electric version and a gas burning one. The electric furnace works on the principle of electrical resistance. In other words, the furnace heats air in a chamber by using an element that creates heat by resisting the passage of an electric current. These are high voltage appliances and rarely have user serviceable parts inside. The most common failure on an electric heater is usually the element of supporting electronics.
The gas based furnace will work on either natural gas or propane/butane. Because of the difference in the size of gas molecules, the appliance will need to be adapted to burn one specific variety. They are typically set to burn natural gas by default because that is the most commonly available fuel. It is not recommended that the home-owner attempt these alterations. The most common problem with a gas-based furnace will be the pilot system or the gas metering unit.
Most modern furnaces are part of a combined HVAC (Heating, Ventilation and Air Conditioning) system. This means that some components are used by both aspects of the appliance and this puts extra wear on them. The two most common areas where you might have problems are the blower fan and the thermostat. Unfortunately, there is little the home-owner can do to repair a broken heating appliance. In fact, it isn’t really safe to attempt even minor work because of the nature of this equipment. Your best option is to always contact an expert like Horizon Services Inc and have the appliance serviced on an annual basis.
