An easy way to improve the look and function of your door is by updating the Door Hardware In Phoenix AZ. Many times, the only issue a door may have is the way the hardware on it is working. If there are even slight problems, the door may stop functioning at all.
One of the most common issues you may have with your door is loose Door Hardware In Phoenix AZ. Many times the doorknob will have become lose and this will cause it to be out of alignment with the strike plate, which helps in closing the door.
When this type of situation occurs, you may be able to tighten the various screws on the doorknob hardware to correct the problem. Many doorknobs have exposed screws and this makes it easy to tighten them.
If the doorknob has hidden screws, you will need to look on the doorknob for a small indention. This is called a detent. This area needs to be pressed. Depending on the type of indention, you will need to use a paper-clip or a screwdriver. Once this is done, you should be able to twist the doorknob off.
After the doorknob is removed, you must remove the decorative trim ring around the doorknob. This may require you to use a screwdriver to pry the ring off. Once the ring has been removed, you should be able to see the screws for the doorknob and can begin tightening them.
In addition, to tightening the screws on the doorknob, the screws on the latch plate should be tightened. The latch plate is the plate on the door-jamb, which helps in latching the door shut. The screws on it are generally easy to see.
If the doorknob is still loose after you have tightened all the screws, the interior spindle of the doorknob may be causing the problem. If the spindle is damaged or worn, you may be able to replace it. Otherwise, you will need to purchase a new doorknob from a store selling door hardware.
When the doorknob on your door is not working correctly, it can make it difficult to keep a door shut. Often you can fix this type of issue quite easily.
