Damages that occur to chimneys vary depending on the causes behind them, hence repair methods also differ. In Silver Spring many trained persons are providing their services for chimney repair. Some of the methods are described below:
Repairing a moving chimney: Sometimes movement occurs in a chimney that could be due to various reasons, including a weak foundation, damaged flue, or a damaged fireplace or the support behind the chimney. If it happens because of a wrong footing, the repair should be done by balancing the footing through jacking. Whereas, in case of a damaged flue, it should be re-lined, moreover cracks in the fireplace should also be repaired.
On the other hand if the damage is severe, the chimney should be replaced with a new construction having a strong footing. Similarly, if a chimney is leaning, the repair can be done through the following methods:
Strapping: If due to poor footing a chimney gets inclined it can be balanced by strapping it to the building. But, this should be done carefully as it may damage the structural wall. A common practice involves tie down a chimney to the building, but the ties are concealed during this process. This method is only successful if the footing is strong. This method of chimney repair is being practiced in many buildings in Silver Spring.
Reconstruction: Some experts suggest the reconstruction of the chimneys, which have slided around 3/16″ or less, as otherwise it may cause fire due to gas accumulation. Even if it gets away from a building, risk of leakage or fir is there.
Repair at the top: Sometimes damage occurs only to the top part of the flue or a chimney, so it should be replaced with a new construction. The newly built part should be covered with a chimney cap, including an expansion joint around the flue.
Footing repair: When the upper chimney part is safe but its footing is weak, then repair is required through piers or other methods, whereas driven pins are also suggested in some cases.
Relining: This is suggested to balance the flue, which has moved, and it’s done by adding a lining to the flue, making it free from the danger of fire and gas.
Repairing a fireplace, when it’s moving: The fireplace should be inspected by an expert to make sure of the movement. Such a movement is controlled through jacking if the hearth is moved, whereas if the fireplace itself is moved, it should be supported. But, sometimes this method may damage the chimney flue, so it should be followed by an inspection. Relining is also suggested for the chimneys in some cases, whereas the cost varies according to the method adopted.
Repairing a metal chimney: As, It is factory built, so the repairing includes a replacement of the broken part. Whereas, sometimes a chimney cap is damaged, so it should be replaced. All these methods are adopted by various professionals for chimney repair in Silver Spring and elsewhere.
Chimney Repair Silver Spring – Chimney repair is very important to protect your house from fire, so if you live in Silver Spring and need such a service, Priddy Clean would not disappoint you.
